To gain access to PMS so they can view available funds, request funds, or submit reports users will need to request permission and be approved by PSC. Recipients will be required to make an online request to obtain this access. Users will need to provide information concerning their organization, their contact and supervisor information, and select the requested access level required. After submitting their request their supervisor will need to verify the information provided and if correct will need to submit it to PSC. PSC will review the request and verify the provided information. Once they issue their approval a user name and a temporary password will be issued to the requester.
Select the ‘Login’ button from the right hand side of the PMS menu bar.
On the PMS Login page, select 'Request Access'.
Click on the ‘Create New User’ button. To return to the Home Page, click on the ‘x’ and select Home Page.
The ‘New User Access Request’ form is displayed.
Select the User Type ‘Grantee/Recipient’ from the dropdown box.
Your email address will need to be verified prior to receiving any access to the system. Type in your email address in the ‘E-Mail Address’ field and then confirm the email address provided by typing the email address again in the ‘Confirm E-Mail Address’ field.
Click ‘Request Email Verification Code’ for an email to be sent to the email address.
Click ‘OK’, a success message will be displayed.
An email message will be sent immediately to the email address provided containing the six digit verification code that is required to continue with the user access request. The verification code will be valid for 30 minutes.
Note: The user will need to request a new verification code if the verification code is not used within the 30 allotted minutes or if the user closes the ‘New User Access Request’ window.
Note: To ensure that system emails are received, recipient IT organizations should white-list PMSSupport@psc.gov
Enter the six digit code in the 'Email Verification Code’ field.
From the ‘Security Question’ dropdown box select one of the question. This question and its answer will pertain to the user access request process only.
Provide the appropriate response to the question selected in the ‘Security Answer’ field.
Note: The security question selected and its answer will need to be provided when either checking on the status of a request or when required to modify a request.
In the ‘Enter Captcha’ field, enter the displayed characters shown in the Image beneath the field. If unable to read the displayed characters update the selection by clicking on the refresh icon next to the image.
Select the ‘Submit’ button on the bottom of the page. If the user no longer wants to submit the information they may clear the form and to provide different information by using the ‘Clear Form’ button or cancel the request by selecting ‘Cancel’.
The PMS Access Request form will be displayed, requesters will need to provide:
Their organization information including the organization name and either the organizations EIN, PIN, or PAN’s that the user needs access to.
User contact information comprising of their work address and telephone number.
Select the type of access that they are requesting.
Their supervisors information including their name, title, email, and phone number.
Optional comments may be provided.
Select the ‘Add’ button to provide the Organization/Institution information that you want access to. Use the ‘Add’ button for each organization that you need access to.
The Organization / Institution Pop-up Box will be displayed after selecting ‘Add’, provide,
The organization name.
Select from one of the available Organization ID Types:
EIN – Consists of the organizations Tax Identification Number, and a PMS prefix and suffix. Users may select to provide only their Tax Identification Number if the PMS prefix and suffix information is unknown.
PIN – Payee Identification Number, issued by PMS. Selecting a PIN will provide the user with access to all PAN that are associated with the PIN.
PAN – Payee Account Number, issued by PMS.
Note: The EIN, PIN, and PAN’s must exist in PMS to be approved by PSC.
Enter either the EIN, PIN, or PAN number depending on the Organization ID Type selected.
When providing an EIN or PIN the user will need to select the ‘Yes’ option for ‘All Accounts’ to confirm that they would like access to all PAN’s associated with the EIN. If the answer to ‘All Accounts’ for the EIN is no then the user should provide the PIN instead. If the answer to ‘All Accounts’ to both the EIN and PIN is ‘No’ then the user should input the individual PAN numbers that they are requesting access to.
EIN are required to be 9-12 characters in length and must be valid EINs in PMS.
PINs are required to be 4-5 characters in length. To add multiple PIN for an organization, save the PIN and then use the organization ‘Add’ button to add additional PINs.
PANs are required to be 5 - 7 characters in length. Click the green plus sign (+) to add additional PANs for an organization.
Use the red minus sign (-) to delete any PANs added in error.
Select ‘Save’ to add the organization information to the request.
The organization information will be shown in the Organization/Institution Section.
To either ‘Remove’ or ‘Edit’ a organization, select the organization in the grid by clicking anywhere on the line and then select either ‘Remove’ or ‘Edit’.
Within the ‘Contact Information’ section provide the following recipient contact information:
Middle Initial (optional)
Full Address, including Country
Phone number including Country code
Telephone number type
Error messages will be displayed for missing required information.
Select the country from the drop down list provided.
When ‘United States’ is selected as the country, the 'State' field will appear and the requester will be required to select the applicable state from the drop down box.
Provide a contact phone number. The country code for the phone number will automatically be filled in depending on the country selected in the address field. To override the country code select the checkbox ‘Do you want to override the Country Code?’ and provide the appropriate country code.
Select from the ‘Telephone Type’ drop down box the phone type of the number provided.
Users will need to select the type of access that they need. The following levels of access are available in PMS.
Default. Allows for updating of user information such as contact information.
Read Only Access
This access is inquiry only. This access should only be chosen when not choosing other accesses or in conjunction with FFR View access.
Access to request funds. This access includes the ability view inquiries
Federal Cash Transaction Report (FCTR) - View
Access to view the quarterly FCTR in which recipients report cumulative federal cash disbursements. This report is used by Payment Management Services to manage recipient accounts. This report is required for all G and P type accounts.
Federal Cash Transaction Report (FCTR) - Preparer
Access to prepare the quarterly FCTR in which recipients report cumulative federal cash disbursements. The ability to View the FCTR is automatically included when choosing this option.
Federal Cash Transaction Report (FCTR) - Certifier
Access to certify the quarterly FCTR in which recipients report cumulative federal cash disbursements. The ability to View the FCTR is automatically included when choosing this option.
Federal Status Report (FSR) - View
Access to view the expenditure report formerly known as the Financial Status Report (FSR).
Federal Status Report (FSR) - Preparer
Access to prepare the expenditure report. The ability to view the FSR is automatically included when choosing this option.
Federal Status Report (FSR) - Certifier
Access to certify the expenditure report. The ability to view the FSR is automatically included when choosing this option.
Check all access levels required.
A supervisor will be required to approve the request. Provide your supervisors:
Middle Initial (optional)
Note: If you are the highest ranking person in your organization, then provide your own information for the Supervisor information.
If the recipient wants to explain why they need access or provide additional information to help PSC verify their information they may provide this information in the comment field. Up to 1000 characters will be accepted.
Prior to submitting the user will need to check the certification box indicating that all the information provided is true to the best of their knowledge. Providing willfully false information is a criminal offense and is punishable by law.
Note: Users that check the certify box and then return to amend any of their answers will be required to recertify their answers prior to being able to successfully submit their application.
Recipients may click the ‘Save’ button at any time to save and exit the request. A Request ID will be emailed to the email address provided. The Request ID and the security question initially selected and its answer will be required to retrieve the request.
Click ‘Submit’ to send the request to the listed Supervisor for approval.
A ‘Success’ screen will be displayed containing the Request ID.
Additionally, an email will be sent to the user containing the ‘Request ID’. The recipient will need to use the ‘Request ID’ along with the security question they selected to check on the status of a request or make updates to saved requests. The provided User ID and the associated security question are valid only while the request is being processed. Once the request has been approved the user will be issued their permanent User ID and will select new security questions to be associated with their new ID.
A rejection email will be received if either the supervisor or PMS returns the request for changes.
Retrieving Existing Requests
Recipients may return to requests in order to complete, fix, or to check on their status.
To either return or check on the status of a submitted request:
The user may either:
Access the PSC Home page at https://pms.psc.gov and select ‘Request Access’ under the login button.
For rejected requests, click on the link listed in the rejection email.
Select ‘Retrieve Existing Request’.
The user will be prompted to provide their:
Request ID – The ID can be found in the email that was initially sent by the system to the user after submitting or saving the registration form.
Security Question – The security question that the user initially selected during the requesting process.
Security Answer – Provide the answer to the security question selected. Field is case sensitive.
Captcha Field – Enter the characters that are displayed in the image provided. If unable to read the displayed characters click on the refresh icon next to the image to obtain a new character set.
Error messages will be displayed if the incorrect Security Question is selected and answered. If a user can no longer recall the question selected then they will need to create a new request.
Click ‘Submit’ after providing the correct information to update the initial request. If the initial request was rejected the rejection reason will be seen in the ‘Request Details’ section.
If the request has already been submitted and a review is in progress then the current status of the request will be displayed to the user.
After a user requests access to PMS the supervisor designated in the request will need to review the submitted information and verify its accuracy. The supervisor information provided by the user will be used to send an email to the supervisor requesting that they review and approve the request.
The email will contain a link that will allow the supervisor to review the provided information.
Note: Supervisors are not required to have access to PMS in order to verify and approve the information provided.
Click on the link within the email received.
The Supervisor view of the Payment Management System Access Request will be displayed. The view will consist of three tabs.
Request Details – will list the information that the user requesting the access provided.
Supervisor Comments – a place for the supervisor to enter any comments. Comments will be required when rejecting the request.
Status History – a list of previous comments and dates that apply to this request.
The Supervisor should review the information on the Request Details tab. The ‘Request Details’ tab is read-only for the supervisor.
After verifying that the provided information is correct the supervisor will be required to certify that the information is true. Click on the box associated with the ‘I certify…’ statement.
Click the ‘Approve’ button. The request will then be sent to PSC for verification and approval.
If the information needs revision then the Supervisor should select the ‘Supervisor Comments’ tab and provide the required changes in the comments section. The Supervisor should then click on the ‘Reject’ button on the ‘Request Details’ tab. An email will be sent to the recipient indicating that the request has been rejected and the request will be available for the recipient to edit.
The Supervisor can view previous comments made either by them or by PMS by selecting the ‘Status History’ tab.
A success screen will be shown to the supervisor after they have approved the request.
Receiving your User ID
Once the supervisor has approved your request for access the request will be forwarded to PSC. PSC will verify the information provided and determine if PMS access should be granted. If it is determined that PMS access will be granted the recipient will receive an email from the system containing their User ID and a temporary password.
Use the link provided in the email to access the PSC home and PMS user login page.
Use the User Name and the temporary password provided in the email
Note: User name and passwords are case sensitive
An error message will be received if either the login or password is invalid.
Following successful first time login, users will need to:
Change their password
Set up their security questions
Certify that they are authorized to use the system.
New users will be shown the ‘Manage User Information’ page.
Users will need to provide the temporary assigned password and then provide a new password.
Passwords are expected to have the following characteristics.
Passwords are case sensitive
The password must be between 8 and 30 characters long
The password may not contain any spaces
The password must NOT contain commonly used words.
The password must contain at least 1 uppercase letter.
The password must contain at least 1 lowercase letter.
The password must contain at least 1 number
The password must contain at least 1 special character but exclude single quote, double quote, colon, or semicolon.
You cannot reuse a password for 300 days and your last 6 passwords.
The password may not contain significant portions of your PMS User ID, first or last name.
Click on the ‘Request Verification Code’ button. A six digit code will be sent to the email address on file immediately.
Provide the code received in the ‘Verification Code’ field.
Select your three (3) Security Questions and Answers.
From each of the Drop downs select a security question.
Provide the appropriate answer in the text box below.
Read the Certification statement and then certify by clicking in the checkbox provided.
Click the ‘Change’ button.
After clicking the ‘Change’ button users will be immediately logged out and should log into PMS using their newly updated password.
All users are required to self-certify annually. The ‘PMS Annual Self Certification’ page will be automatically displayed following the first successful login to the system. Read the certification information and then select the ‘I Agree’ button.